Switch Location; Switching Power - Subaru Impreza 2016 Manual

occurs, or not to issue a warning when
any malfunction occurs.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– Inside the trunk (4-door)
– In the cargo area (5-door)
. When operating the push-button
ignition switch or starting the engine,
if the battery of the access key is
discharged, perform the procedure
described in "Access key – if access
key does not operate properly" F9-29.
In such a case, replace the battery
immediately. Refer to "Replacing bat-
tery of access key" F11-61.
Instruments and controls/Push–button ignition switch (models with push–button start system)
& Switch location
Left-hand drive models
Right-hand drive models
1) Operation indicator
2) Push-button ignition switch
& Switching power
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver s seat.
2. Shift the shift lever in neutral (MT
models) or the select lever in the P
position (CVT models).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
models) or the brake pedal (CVT models).
Every time the button is pressed, the
power is switched in the sequence of
OFF , ACC , ON and
operation indicator on the push-button
ignition switch illuminates or turns off as
shown in the following chart.
Power
Indicator color Operation
status
OFF Turned off Power is turned off.
The following parts
can be used:
ACC Orange wipers, washer,
audio and acces-
sory power outlet.
Orange
(while engine is
stopped)
All electrical parts
ON
can be used.
Turned off
(while engine is
running)
– CONTINUED –
3-7
OFF . The