Locking And Unlocking With "Keyless Access" Entry Function - Subaru Impreza 2016 Manual

recommended that all of the remaining
access keys be reregistered. For rere-
gistration of an access key, we recom-
mend that you contact a SUBARU
dealer.
. For a spare access key, we recom-
mend that you contact a SUBARU
dealer.
. Up to 7 access keys can be regis-
tered for one vehicle.
. Carefully store the key number plate
supplied with the access key. It is
necessary for vehicle repair and addi-
tional registration of access keys.
. Do not leave the access key in the
storage spaces inside the vehicle, such
as the door pocket, dashboard, inside
the trunk and the corner of the cargo
area. Vibrations may damage the key or
turn on the switch, possibly resulting in
a lockout.
. After the vehicle battery is dis-
charged or replaced, initialization of
the steering lock system may be re-
quired to start the engine. In this case,
perform the following procedure to
initialize the steering lock.
(1) Turn the push-button ignition
switch to the "OFF" position. For
details, refer to "Switching power"
F3-7.
(2) Open and close the driver's
Keys and doors/Keyless access with push–button start system
door.
(3) Wait for approximately 10 sec-
onds.
When the steering is locked, the initi-
alization is completed.
. Do not leave the access key in the
following places.
– On the instrument panel
– On the floor
– Inside the glove box
– Inside the door trim pocket
– On the rear seat
– On the rear shelf (4-door)
– Inside the trunk (4-door)
– In the cargo area (5-door)
If you do, the following situations
may occur.
– The access key is mistakenly
locked inside the vehicle.
– A false warning issues although
no malfunction actually occurs.
– No warning issues even when
any malfunction occurs.
& Locking and unlocking with
"keyless access" entry func-
tion
! Operating ranges
4-door
1) Antenna
2) Operating range
– CONTINUED –
2-11