Device Information - Cisco Unified IP Phone 8941 Administration Manual

• Search for the phone in Cisco Unified Communications Manager Administration by choosing Device
> Phone. Phones registered with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
• On the Cisco Unified IP Phone, press Applications, choose Administrator Settings > Network Setup,
and then scroll to the IP Address option.
Step 2 Open a web browser and enter one of the following URLs, where IP_address is the IP address of the Cisco
Unified IP Phone:
http://IP_address
or
https://IP_address

Device Information

The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
To display the Device Information area, access the web page for the phone, and then click the Device
Information hyperlink.
Table 22: Device Information Area Items
Item
MAC Address
Host Name
Phone DN
App Load ID
Boot Load ID
Hardware Revision
Serial Number
Model Number
Message Waiting
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Description
Media Access Control (MAC) address of the phone
Unique, fixed name that is automatically assigned to the phone based on its MAC
address
Directory number assigned to the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the phone
Revision value of the phone hardware
Unique serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on the primary line for this phone.
Cisco IP Phone Web Page
and SIP)
151