Cisco Unified IP Phone 8941 Administration Manual page 161

Item
Restart Cause: One of these values:
• Hardware Reset (Power-on
reset)
• Software Reset (memory
controller also reset)
• Software Reset (memory
controller not reset)
• Watchdog Reset
• Unknown
Port 1
Port 2
IPv4
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Description
Cause of the last reset of the phone
Link state and connection of the PC port (for example, Auto 100 Mb
Full-Duplex means that the PC port is in a link-up state and has
autonegotiated a full-duplex, 100Mbps connection)
Link state and connection of the Network port
Information on the DHCP status. This includes the following states:
CDP BOUND
CDP INIT
DHCP BOUND
DHCP DISABLED
DHCP INIT
DHCP INVALID
DHCP REBINDING
DHCP REBOOT
DHCP RENEWING
DHCP REQUESTING
DHCP RESYNC
DHCP UNRECOGNIZED
DHCP WAITING COLDBOOT TIMEOUT
SET DHCP COLDBOOT
SET DHCP DISABLED
DISABLED DUPLICATE IP
SET DHCP FAST
Cisco Unified IP Phone Status
and SIP)
147