Viewing Statistical And Operational Information; Device Information - Cisco 7905G Administrator's Manual

Viewing Statistical and Operational Information

Step 3
Step 4
Viewing Statistical and Operational Information

Device Information

Note
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
7-4
Chapter 7 Configuring the Cisco IP Phone Models 7905G and 7912G Using Web Pages
If you selected Network Parameters, SIP Parameters, Call Preferences, Tone
Parameters, or Audio Parameters, follow these steps:
a. If you have set up a password with the UIPassword parameter in the profile,
enter the password in the UIPassword field, and then click Apply. (If you
want to change the password, enter the new password in the two
ChangeUIPassword fields before clicking Apply.)
b. Make changes to parameters as needed and click Apply to save your changes.
Close your web browser.
The following sections describe the information that you can obtain from a
phone's web page. You can use this information to remotely monitor the
operation of a phone and to assist with troubleshooting.
Device Information, page 7-4
•
• Network Configuration, page 7-5
Network Statistics, page 7-6
•
Table 7-1 explains the fields displayed in the Device Information area of the
Cisco IP Phone web page.
To access the Device Information area directly from a web browser, enter
ip_address/DeviceInformation, where ip_address is the IP address of your
Cisco IP Phone.
OL-4277-01