Device Information - Cisco 7902G Administration Manual

Cisco unified callmanager 5.0
Hide thumbs Also See for 7902G:
Table of Contents

Advertisement

Appendix A
Additional Configuration Methods and Parameters
Step 4
Step 5

Device Information

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
From the Web Access drop-down list, choose Disabled.
Click Update.
Some features, such as Cisco Quality Report Tool, do not function
Note
properly without access to the phone web pages. Disabling web access
also affects any serviceability application that relies on web access, such
as CiscoWorks.
To enable web page access when it is disabled, follow the preceding steps, but
choose Enabled in Step 4.
The Device Information area of the Cisco Unified IP Phone web page displays
device settings and related information for the phone.
items.
To display the Device Information area, perform either of these steps:
Access the web page for the phone as described in the
Settings through a Phone Configuration Web Page" section on page 4-3
then click the Device Information hyperlink.
In a web browser, enter this URL: ip-address/DeviceInformation, where
ip-address is the IP address of the phone.
Table A-2
Device Information Area Items
Item
MAC address
Host name
Phone DN
App Load ID
Boot Load ID
Description
Unique Media Access Control (MAC) address of the
phone
Unique host name assigned to the phone
Directory number assigned to the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the
phone
Web Page Configuring
Table A-2
describes these
"Accessing Network
A-9
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

7905g7912g

Table of Contents