Cisco Unified IP Phone 8941 Administration Manual page 110

Telephony Features
Feature
Headset Sidetone Control
Hold Reversion
Hold Status
Hold/Resume
Hold or Resume Toggle
HTTP Download
HTTPS Support
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
96
Description
Allows an administrator to set the sidetone level of a wired headset. Available sidetone levels
are:
• Normal
• Low
• Very Low
• Off
See to the Cisco Unified Communications Manager Administration Guide, "Cisco Unified IP
Phone Configuration" chapter.
Limits the amount of time that a call can be on hold before reverting back to the phone that
put the call on hold and alerting the user.
Reverting calls are distinguished from incoming calls by a single ring or beep, depending on
the new call indicator setting for the line. This notification repeats at intervals if the call is not
resumed.
A call that triggers Hold Reversion also displays an animated icon in the call bubble.
You can configure call focus priority to favor incoming or reverting calls.
See the Cisco Unified Communications Manager Features and Services Guide, "Hold
Reversion" chapter.
Enables phones with a shared line to distinguish between the local and remote lines that placed
a call on hold.
No configuration is required.
Allows the user to move a connected call from an active state to a held state.
Requires no configuration, unless you want to use music on hold. See "Music on Hold" in this
table for information.
See "Hold Reversion" in this table.
Allows you to toggle a call between active and on-hold state.
To place a call on hold, press Hold. To resume a call, press Hold again.
The Hard key for this feature requires no configuration, unless you want to use music on hold.
For more information, see "Hold Reversion" in this table.
To enable a caller to hear music while on hold, see "Music on Hold" in this table.
Enhances the file download process to the phone to use HTTP by default. If the HTTP download
fails, the phone reverts to using the TFTP download.
No configuration required.
Increases security by requiring communication using HTTPS.
See the Cisco Unified Communications Manager documentation.