Set Up Incoming Call Toast Timer
You can set the time that the Incoming Call Toast (incoming call notification window) displays on the user
phone.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select one of the following windows:
• Device > Phone
• Device > Device Settings > Common Phone Profile
• System > Enterprise Phone Configuration
If you configure the parameter in multiple windows, the precedence order is:
1 Device > Phone
2 Device > Device Settings > Common Phone Profile
3 System > Enterprise Phone Configuration
Step 2
If required, locate the phone.
Step 3
Set the Incoming Call Toast Timer field.
Field
Incoming Call Toast Timer
Step 4
Select Save.
Set Up Remote Port Configuration
To configure the Switch Remote Port Configuration parameter or the PC Remote Port Configuration parameter,
you can configure individual phones or multiple phones.
Procedure
Step 1
To configure the parameter for individual phones, perform the following steps:
Description
Gives the time, in seconds, that the toast displays. The time includes the
fade-in and fade-out times for the window.
The possible values are 3, 4, 5, 6, 7, 8, 9, 10, 15, 30, and 60.
The default is 5.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
Set Up Incoming Call Toast Timer
and SIP)
127