Cisco Unified IP Phone 8941 Administration Manual page 168

Cisco IP Phone Web Page
Item
DHCP
Enabled
DHCP
Address
Released
Alternate
TFTP
Idle URL
Idle URL Time
Proxy Server
URL
Authentication
URL
Automatic Port
Synchronization
SW Port
Configuration
PC Port
Configuration
SW Port Setup
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
154
Description
Indicates whether DHCP is being used by the phone.
Indicates the setting of the DHCP Address Released option on the phone Network Setup
menu.
Indicates whether the phone is using an alternative TFTP server.
URL that the phone displays when the phone has not been used for the time specified by
Idle URL Time, and no menu is open.
Number of seconds that the phone has not been used and no menu is open before the XML
service specified by Idle URL is activated.
URL of proxy server, which makes HTTP requests to nonlocal host addresses on behalf of
the phone HTTP client and provides responses from the nonlocal host to the phone HTTP
client.
URL that the phone uses to validate requests made to the phone web server.
Indicates if the phone is enabled to synchronize the PC and SW ports to the same speed
and to duplex mode.
Indicates if remote port configuration of the speed and duplex mode for the switch port is
enabled or disabled.
Indicates if remote port configuration of the speed and duplex mode for the PC port is
enabled or disabled.
Speed and duplex of the switch port, where:
• A: Auto Negotiate
• 10H: 10-BaseT/half duplex
• 10F: 10-BaseT/full duplex
• 100H: 100-BaseT/half duplex
• 100F: 100-BaseT/full duplex
• 1000F:1000-BaseT/full duplex
• No Link: No connection to the switch port