Cisco Unified IP Phone 8941 Administration Manual page 104

Telephony Features
Feature
Call Forward All Loop Breakout
Call Forward All Loop Prevention
Call Forward Configurable Display
Call Forward Destination Override
Call Forward Notification
Call Log Filter Enhancement
Call Park
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
90
Description
Detects and prevents Call Forward All loops. When a Call Forward All loop is detected, the
Call Forward All configuration is ignored and the call rings through.
See the Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
chapter.
Prevents a user from configuring a Call Forward All destination directly on the phone that
creates a Call Forward All loop or that creates a Call Forward All chain with more hops than
the existing Forward Maximum Hop Count service parameter allows.
See the Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
chapter.
Allows you to specify information that appears on a phone when a call is forwarded. This
information can include the caller name, caller number, redirected number, and original dialed
number.
See:
• Cisco Unified Communications Manager Administration Guide, "Directory Number
Configuration"
• Cisco Unified Communications Manager System Guide, "Cisco Unified IP Phone"
Allows you to override Call Forward All (CFA) in cases where the CFA target places a call
to the CFA initiator. This feature allows the CFA target to reach the CFA initiator for important
calls. The override works whether the CFA target phone number is internal or external.
See the Cisco Unified Communications Manager System Guide, "Understanding Directory
Numbers" chapter.
Allows you to configure the information that the user sees when receiving a forwarded call.
For more information, see Set Up Call Forward Notification, on page
Assists the user make a call by checking the call history as the user dials and presenting a list
of entries that match the digits as they are input. The user can select one of the displayed
numbers instead of entering the complete telephone number.
To disable call log filtering, the administrator enables the Simplified New Call UI field. By
default, call log filtering is enabled.
See the Cisco Unified Communications Manager Administration Guide.
Allows users to park (temporarily store) a call and then retrieve the call by using another
phone in the Cisco Unified Communications Manager system.
See the Cisco Unified Communications Manager Features and Services Guide, "Call Park
and Directed Call Park" chapter.
126.