Device Information - Cisco 8961 Administration Manual

Device Information

• HTTP or HTTPS protocols
If your Cisco Unified IP Phone is configured to use the HTTP or HTTPS protocols, use http://<IP_address>
or https://<IP_address> for phone web access.
If your Cisco Unified IP Phone is configured to use only HTTPS protocol, use https://<IP_address> for phone
web access.
Device Information
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
Note Some of the items in the following table do not apply to all phone models.
To display the Device Information area, access the web page for the phone as described in
for Phone, on page
Table 51: Device Information Area Items
Item
MAC Address
Host Name
Phone DN
Version
Key Expansion Module 1
Key Expansion Module 2
Key Expansion Module 3
Hardware Revision
Serial Number
Model Number
Message Waiting
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
250
REVIEW DRAFT - CISCO CONFIDENTIAL
248, and then click the Device Information hyperlink.
Description
Media Access Control (MAC) address of the phone.
Unique, fixed name that is automatically assigned to the phone based on the
MAC address.
Directory number that is assigned to the phone.
Identifier of the firmware that is running on the phone.
Identifier for the first KEM, if applicable.
Identifier for the second KEM, if applicable.
Identifier for the third KEM, if applicable.
Revision value of the phone hardware.
Unique serial number of the phone.
Model number of the phone.
Indicates whether is a voice message is waiting on the primary line for this phone.
Remote Monitoring
Access Web Page