Setting Custom Alarms - BRP Evinrude E-TEC Icon Pro Series User Manual

Setting Custom Alarms

A custom alarm can be set for select data fields present in the tachometer.
To set a custom pop up:
1.) Press and hold the MODE button to enter the Menu Options.
2.) Use the UP or DOWN buttons to select CSTM ALARMS.
3.) Press and hold the MODE button to make the desired selection.
4.) Use the UP or DOWN buttons to select the desired data field.
5.) Press and hold the MODE button to save the selection.
6.) Continue with the steps in the next sections.
NOTE: Available data fields are OIL PRESURE and ENGINE TEMPERA-
TURE.
010113
010114
95