Table of Contents
Advertisement
Alarms
The ICON gauge package is equipped with an ALRAMS menu that
enables the user to view current and past alarms.
View Current Alarms
To view the current alarms enter the ALARMS screen, then:
1.) Use the UP or DOWN buttons to select ALARMS.
2.) Press and hold the MODE button to enter the selection.
3.) Use the UP or DOWN buttons to select VIEW.
4.) Press and hold the MODE button to enter the selection.
If there are current alarms, the screen will show the first alarm. Use the UP
or DOWN buttons to view all alarms. When finished, press the MODE but-
ton to escape.
NOTE: Date information is available only if a NMEA 2000 GPS antenna is
installed in the system.
If there are no current alarms, the LCD screen will display NO STORED
ALARMS FOUND! for two seconds and an audible beep will be issued.
010030
010031
45
Advertisement
Table of Contents
