Winterizing the Engine (G1 Engines)
The ICON gauge package provides a WINTERIZE feature for 2008 or
newer Evinrude E-TEC V4 and V6 model engines. The engine must be
running to use this feature. Refer to the Outboard Operator's Guide for
complete procedure and Safety Precautions.
To winterize the engine, enter the SYSTEM menu, then:
1.) Use the UP or DOWN buttons to select WINTERIZE.
2.) Press and hold the MODE button to enter the selection.
The LCD screen will display message "PERFORM WINTERIZE?".
3.) Press and hold the MODE button to enter WINTERIZATION.
The LCD screen will display the message "RECEIVING DATA TO START
THE PROCESS".
52
010042
010043