Fuel Totalizer; Reset The Totalizer Fuel Used - BRP Evinrude E-TEC Icon Pro Series User Manual

Fuel Totalizer

The Fuel Totalizer is used when more than one Fuel Tank is installed in the
system. The Totalizer will monitor all of the installed Fuel Tanks, gather
and combine the data for fuel usage for the entire system. The ICON
gauge automatically collects the fuel data based on the settings in the indi-
vidual tank settings completed in the FUEL SETUP section of this book.

Reset the Totalizer Fuel Used

1.) Use the UP or DOWN buttons to select RESET TOTALIZER.
2.) Press and hold the MODE button to enter the RESET TOTALIZER
menu.
3.) Use the UP and/or DOWN buttons to select YES. Then press and
hold the MODE button to save the selection. The LCD screen will display
SETTING SAVED! and the gauge will issue an audible beep.
4.) Select NO to exit.
009988
009989
19