Master Reset
Use the MASTER RESET feature to reset the tachometer to the factory
default settings.
To perform a master reset, enter the SYSTEM menu, then:
1.) Use the UP or DOWN buttons to select MSTR RESET.
2.) Press and hold the MODE button to enter the selection.
3.) Use the UP or DOWN buttons to select YES or NO.
4.) Press and hold the MODE button to enter the selection.
If NO is selected the gauge will exit to the SYSTEM menu. If YES is
selected continue with the next step.
A warning message will display for five seconds and the horn will beep
three times. Next, the LCD screen will display the message: CONTINUE
WITH RESET?
5.) Use the UP or DOWN buttons to select YES or NO.
6.) Press and hold the MODE button to enter the selection.
If NO is selected, the gauge will exit to the SYSTEM menu.
If YES is selected, the ICON gauge will be reset to the factory default set-
tings.
010040
010041
51