Table of Contents
Advertisement
Tank Setup (G1 Engines)
For each tank indicated in the system, the ICON tachometer will ask for
the type of tank being used. Tank types available are FUEL, FRESHWA-
TER, GREY WATER, LIVEWELL, OIL LEVEL, BLACK WATER, BALLAST
and AVAIL TANK.
1.) Use the UP or DOWN buttons to select the type of tank being used in
the system.
2.) Press and hold the MODE button to save the appropriate type of
tank. The LCD screen will display SETTING SAVED! and the horn will
sound an audible beep.
If FUEL is selected, go to Step 3 for the fuel tank setup procedure.
3.) Use the UP or DOWN buttons to set the capacity of the first fuel tank.
Press and hold the UP or DOWN button to set the fuel tank capacity in a
more rapid manner.
4.) Press and hold the MODE button to save the capacity of the fuel
tank. The LCD screen will display SETTING SAVED! and sound an audi-
ble beep.
5.) Repeat Steps 1-4 for additional fuel tanks.
6.) When the Fuel Tank Setup is completed and all available tank types
have been identified, the tachometer's initialization is complete. The dis-
play will read "BASIC INITIALIZATION COMPLETE!" and the ICON
gauge will issue an audible beep.
009972
009973
13
Advertisement
Table of Contents
