Battery (G2 Engines) - BRP Evinrude E-TEC Icon Pro Series User Manual

Battery (G2 Engines)

Use the Battery data source to determine the number of batteries that are
installed in the system. By default, the battery instance matches the
engine ID. The number of batteries is set to the number of engines
selected during system setup. To access the batteries showing on the
gauge:
1.) Press the MODE button once.
2.) Use the UP and DOWN buttons to scroll to EDIT MENU.
3.) Press and hold the MODE button to enter the EDIT MENU.
4.) Use the UP and DOWN buttons to scroll to DISPLAY.
5.) Press and hold the MODE buttons to enter the DISPLAY menu.
104
010128
010129