Set Number Of Data Pages - BRP Evinrude E-TEC Icon Pro Series User Manual

Set Number of Data Pages

The default number of data pages is three. A data page can contain up to
two data fields. To add or delete data pages enter the DISPLAY menu,
then:
1.) Use the UP or DOWN buttons to select # OF SCREENS.
2.) Press and hold the MODE button to enter the selection.
3.) Press the UP button to increase, or press the DOWN button to
decrease the number of data pages.
The minimum number of data pages is one and the maximum is twenty
two.
4.) Press and hold the MODE button to save the selection.
118
010144
010145