Tanks - BRP Evinrude E-TEC Icon Pro Series User Manual

Tanks

The Tanks data source is where the source of the information that is
received from a certain tank will display.
The tanks that are available for changes are:
•
LIVEWELL 1,2 AND 3,
•
GREYWATER 1,2 AND 3
•
BALLAST 1, 2, AND 3
•
OIL LEVEL 9, 10 AND 11
•
FRESHWATER 1, 2 AND 3
•
BLACKWATER 1, 2 AND 3
To make changes to the tank's data source, enter the DATA SOURCES
menu then:
1.) Use the UP or DOWN buttons to select TANKS.
2.) Press and hold the MODE button to enter the selection.
3.) Use the UP and DOWN buttons to select the TANK# in which to
make changes.
010119
010120
99