Fuel Remaining Source - BRP Evinrude E-TEC Icon Pro Series User Manual

Fuel Remaining Source

The ICON 2 inch fuel gauge and the fuel data field displayed by the LCD
screen on the tachometer display the fuel level determined by the fuel
REMAINING SOURCE.
IMPORTANT:
Selection of ENGINE requires correct management of
FUEL ADDED at every fill-up.
1.) Use the UP or DOWN buttons to select REMAIN SRC.
2.) Press and hold the MODE button to enter the selection.
3.) Use the UP or DOWN buttons to select the Remaining Source.
•
Select SENDER for fuel tanks that use a sender.
•
Select ENGINE for fuel tanks that do not use a sender.
4.) Press and hold the MODE button to save the selection.
64
010060
010061