Table of Contents
Advertisement
Set Display Units
Use the Set Units menu to change the units for the data recorded in the
ICON tachometer. Use the set units menu to change the units on all data
or individual data type.
The units of the following information can be changes; ALL UNITS, VOL-
UME, DITANCE, SPEED, TEMPERATURE, DEPTH, PRESSURE, GPS
COG and FLOW RATE.
To make a change to the units, enter the SYSTEM menu then:
1.) Use the UP or DOWN buttons to select SET UNITS.
2.) Press and hold the MODE button to enter the selection.
3.) Use the UP or DOWN buttons to select the data type to be changed.
4.) Press and hold the MODE button to enter the selection.
5.) Use the UP or DOWN buttons to select the desired units type.
6.) Press and hold the MODE button to save the selection. The LCD
screen will display SETTING SAVED! and the gauge will issue an audible
beep.
010033
009970
47
Advertisement
Table of Contents
