3-Way Conferencing; Intercom/Call Transfer Feature - Uniden DCT646-2 Series Quick Easy Steps Manual

*If the party is busy or
out of range, the
handset returns to
standby mode.
*If any of the for[owing
occurs while setecting
the other handset,
the operation wi[[
be canceled.
- Press talk/flash
or speaker.
- Receive an outside/
intercom ca[[ or page.
*When the party does
not answer within one
minute, the operation
is canceled.
*Standby Mode -
The handsetis not in
use and talk/flash
has not been pressed.
3-Way Conferencing
The phone permits 3-way conversations between 2 handsets, and an outside line.
1) During a call, press talk/flash on another handset to initiate the 3-way conversation.
2) To remove either caller from your conversation, press end key on either handset.
The other handset will still be connected to the call.
Intercom/Call Transfer Feature
If you have one or more extra handsets, you can enjoy an intercom call between handsets.
Also, you can place an outside call on hold and transfer the call to another handset.
Intercom
1) Press hold/transfer/int'com in standby mode.
2) Select the handset you want to talk with from the
selection list within 30 seconds. To select the handset,
press rfng/vol/A or rfng/vol/v and then press
select/_.
If you select Aii, all handsets will be paged.
An intercom tone sounds.
_ ,:::. ,:::, rq :H: 2 .
Tr ...:
3) On the receiving handset, to answer the call, press talk/flash or hold/transfer/int'com.
If you turn AutoTalk on, pick up the handset from the cradle. If Anykey Answer is on,
press any number key, _/tone/<-- or #/3.
4) To finish the intercom call, press end on either handset.
[52] EXPANDING YOUR PHONE www.uniden.com