1. Loosen screws A.
2. Adjust component to desired position.
3. Tighten screws.
Swing In/Out Remote Holder
•
10 mm wrench
A
1. Loosen nut A.
2. Adjust component to desired position.
3. Tighten nut.
1578997-N
Fig. 5-8
Fig. 5-9
5.7.5 Adjusting Remote Position
•
3 mm Allen key
1. Loosen screws A.
2. Adjust component to desired position.
3. Tighten screws.
5.7.6 Swivelling Remote to Side
If your mobility device is fitted with a swivelling remote
holder, then the remote can be moved away to the side, for
example, to drive up close to a table.
Fig. 5-10
Setup
41