5.2.5 Adjusting remote position
•
3 mm Allen key
1. Loosen Allen screws A.
2. Adjust remote to desired position.
3. Re-tighten Allen screws.
5.2.6 Swivelling the remote to the side
1578997-E
If your mobility device is fitted with a swing-away remote
holder, then the remote can be moved away to the side, for
example, to drive up close to a table.
5.3 Adjustment Possibilities for Nucleus Midline
Holder
5.3.1 Adjusting Depth of Midline Holder
1. Loosen lever A.
2. Shift midline holder to desired position.
3. Tighten lever.
5.3.2 Adjusting Height of Nucleus Midline Holder
You can adjust the height of the nucleus midline holder in
two ways:
•
Adjust it together with the armrest height. Refer to
corresponding armrest chapters.
•
Adjust the height of the nucleus midline holder only.
Refer to section below.
•
3/16" (4.8 mm) Allen key
Setup
33