Adjusting Position Of Rea Headrest Or Neckrest; Adjusting Height Of Rea Headrest Or Neckrest - Invacare TDX SP2 Series User Manual

Invacare® TDX® SP2 Series

5.9.1 Adjusting Position of Rea Headrest or Neckrest

The adjustment of the position is the same for all Rea
headrests and neckrests.
• 5 mm Allen key
46
1. Loosen the screws A , B or the clamping lever C.
2. Adjust the headrest or neckrest to the required position.
3. Retighten screws and clamping lever.
4. Loosen the Allen screw D.
5. Slide the headrest left or right to the required position.
6. Retighten the Allen screw.

5.9.2 Adjusting Height of Rea Headrest or Neckrest

The adjustment of the height is the same for all Rea
headrests and neckrests.
1. Loosen hand screw A.
2. Adjust component to desired position.
3. Tighten hand screw.
Fig. 5-21
1578997-N