Lexmark MX822 User Manual page 117

Understanding the printer menus
Menu item
Paper Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)*
Sides
1‑Sided*
2‑Sided
Staple
Off*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
Hole Punch
Off*
2 holes
3 holes
Offset Pages
None*
Between Copies
Between Jobs
Flip Style
Long Edge*
Short Edge
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the paper source for the print job.
Keep the pages of a print job stacked in sequence, particularly when printing
multiple copies of the job.
Specify whether to print on one side or both sides of the paper.
Specify the staple position for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the punch mode for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Offset the output of each print job or each copy of a print job.
Notes:
•
Between Copies offsets each copy of a print job if Collate is set to On
[1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages
are offset, such as all page 1s and all page 2s.
•
Between Jobs sets the same offset position for the entire print job
regardless of the number of copies printed.
•
This menu item appears only when a staple finisher is installed.
Determine which side of the paper is bound when performing two‑sided printing.
117