Adjusting Toner Darkness; Job Prints From The Wrong Tray Or On The Wrong Paper - Lexmark MX822 User Manual

Troubleshooting
Action
Step 7
Install the correct print driver.
Is the printer responding?
Step 8
Turn off the printer, wait for about 10 seconds, and then turn on the
printer.
Is the printer responding?

Adjusting toner darkness

1
From the home screen, touch Settings > Print > Quality.
2
Adjust the toner darkness.
3
Apply the changes.

Job prints from the wrong tray or on the wrong paper

Action
Step 1
a
Check if you are printing on the correct paper.
b
Print the document.
Is the document printed on the correct paper?
Step 2
a
Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.
Note: You can also change the settings on the printer control
panel. Navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type
b
Make sure that the settings match the paper loaded.
c
Print the document.
Is the document printed on the correct paper?
Step 3
a
Check if the trays are linked.
For more information, see
b
Print the document.
Is the document printed from the correct tray?
"Linking trays" on page
Yes
The problem is
solved.
The problem is
solved.
Yes
Go to step 2.
The problem is
solved.
The problem is
solved.
35.
242
No
Go to step 8.
Contact customer
support.
No
Load the correct
paper size and paper
type.
Go to step 3.
Contact customer
support.