Software; Installing The Printer Software; Adding Available Options In The Print Driver - Lexmark MX822 User Manual

Upgrading and migrating
6
Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
7
Turn on the printer.
Add the finisher in the print driver to make it available for print jobs. For more information, see
available options in the print driver" on page

Software

Installing the printer software

1
Obtain a copy of the software installer package.
•
From the software CD that came with your printer.
•
Go to http://support.lexmark.com, and then select your printer and operating system.
2
Run the installer, and then follow the instructions on the computer screen.
3
For Macintosh users, add the printer.
Note: Obtain the printer IP address from the home screen.

Adding available options in the print driver

For Windows users
1
Open the printers folder.
2
Select the printer you want to update, and then do either of the following:
•
For Windows 7 or later, select Printer properties.
•
For earlier versions, select Properties.
Navigate to the Configuration tab, and then select Update Now ‑ Ask Printer.
3
4
Apply the changes.
For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2
Navigate to the list of hardware options, and then add any installed options.
3
Apply the changes.
272.
272
"Adding