Adjusting The Anti-Scalp Rollers - Toro Z Master Professional 5000 Series Operator's Manual

Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, it is
recommended to adjust the height of the anti-scalp
rollers.
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the
position, and set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Adjust the anti-scalp rollers as shown in
26, Figure 27, and
Figure 26
1. Anti-scalp roller
2. Spacer
3. Bushing
Figure 27
1. Anti-scalp roller
2. Bushing
-
NEUTRAL LOCK
Figure
Figure 28.
4. Flange nut
5. Bolt
3. Flange nut
4. Bolt
1. Anti-scalp roller
2. Spacer
3. Bushing
g000942
g000943
27
Figure 28
4. Flange nut
5. Bolt
g000944