Stopping The Machine - Toro Z Master Professional 5000 Series Operator's Manual

Driving Forward
Note:
The engine will shut off if the traction-control
levers are moved with the parking brake engaged.
To stop, pull the motion-control levers to the
N - position.
EUTRAL LOCK
1. Release the parking brake; refer to
the Parking Brake (page
2. Move the levers to the center,
3. To go forward, slowly push the motion-control
levers forward (Figure
Figure 23
Releasing
20).
position.
NEUTRAL
23).
g008952
Driving Backward
1. Move the levers to the center,
2. To go backward, slowly pull the motion-control
levers rearward

Stopping the Machine

To shut off the machine, move the traction-control
levers to , and then move them to the
NEUTRAL
position, disengage the power take off (blade-control
switch (PTO), and turn the ignition key to the O
position.
Set the parking brake when you leave the machine;
refer to Setting the Parking Brake (page
the key from the ignition switch.
25
position.
UNLOCK
(Figure 24).
Figure 24
20). Remove
g008953
LOCK
FF