Technical Specifications - Tunturi E4R Owner's Manual

after a few minutes of use the effect disappears
as the belt returns to its original form.
If the equipment does not function
NOTE!
properly during use, contact your Tunturi
dealer immediately. Always give the model
and serial number of your equipment. Please
state also the nature of the problem, conditions
of use and purchase date. Despite continuous
quality control, defects and malfunctions caused
by individual components may occur in the
equipment. In most cases it's unnecessary to take
the whole equipment in for repair, as it's usually
sufficient to replace the defective part.

TECHNICAL SPECIFICATIONS

Length 165 cm
Height 100 cm
Width 67 cm
Weight 63 kg
All Tunturi models meet the requirements of
the EU's EMC Directives on electromagnetic
compatibility (89/336/EEC) and electrical
equipment designed for use within certain
voltage limits (73/23/EEC). This product
therefore carries the CE label.
The North American versions (115 V) comply
with FCC requirements on electromagnetic
compatibility and are accordingly marked with
the FCC label. The North American versions also
comply with the following safety standards: UL
1647 and CSA C 22.2 No. 68-92.
All Tunturi ergometers meet EN precision and
safety standards (EN-957, parts 1 and 5).
Due to our continuous policy of product
development, Tunturi reserves the right to change
specifications without notice.
•
O W N E R ' S M A N U A L
GB
E 4 R
13