Transport And Storage; Technical Specifications - Tunturi E40 Owner's Manual

If the equipment does not function properly during use,
contact your Tunturi dealer/distributor immediately.
Always give the model and serial number of your
equipment. Please state also the nature of the problem,
conditions of use and purchase date.
If you require spare parts, always give the model, serial
number of your equipment and the spare part number for
the part you need. The spare part list is at the back of this
manual. Use only spare parts mentioned in the spare part list.
TRAnsPORT
AnD sTORAgE
Please follow these instructions when carrying and moving
the equipment about, because lifting it incorrectly may
strain your back or risk other accidents:
• Always switch the power off and unplug the power cord
before you start moving the equipment around!
• For transportation or moving of the device, two grown-
ups are needed. Remain standing in front of the device
on each side and take a sturdy grip at the handles. Lift
the front of the device so as to lift the rear of the device
on the wheels. Move the device and carefully put it
down to its new place.
nOTE!
Transport the equipment with caution over
uneven surfaces, for example over a step. The equipment
should never be transported upstairs using the wheels over
the steps, instead it must be carried. We recommend that
you use a protective base when transporting the
equipment.
To prevent the equipment malfunctioning, store in a dry
place with as little temperature variation as possible and
protected from dust.
TEChniCAl
sPECiFiCATiOns
Length........................................... 97 cm / inches
Width ............................................ 70 cm / inches
Height............................................ 129 cm / inches
Weight .......................................... 43 kg / inches
The Tunturi E40 meets the requirements of the EU's EMC
Directives on electromagnetic compatibility (89/336/EEC)
and electrical equipment designed for use within certain
voltage limits (73/23/EEC). This product therefore carries
the CE label.
The Tunturi model E40 meets EN precision and safety
standards (Class A, EN-957, parts 1 and 5) for fitness
devices. The precision of the capacity measurement is
secured during manufacturing by adjusting the brake
with a dynamometer. Calculation of exercise capacity is
based on rotation speed and moment.
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications without
notice.
nOTE! The instructions must be followed carefully in
the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence
of the assembly, adjustment and maintenance instructions
described herein. Changes or modifications not expressly
approved by Tunturi will void the user's authority to
operate the equipment!
WE WISH YOU MANY ENJOYABLE TRAINING HOURS WITH
YOUR NEW TUNTURI TRAINING PARTNER!
11
E40 - OWNER'S MANUAL English