JRC NCR-333 Instruction Manual page 94

I
a. The check of In/output data (PORT SELECTION)
Procudure
1) Select 1.PORT SELECTION , and press the lEN] key. Cursor moves to the right side of":".
2) Press the
~ ~
key and select the following items;
OFF: The monitoring of each port does not carry out.
GPS IN: Input data of the GPS port
DISP IN: Input data of the DISP (Option) port
DISP OUT: Output data of the DISP (Option) port
3) Example -Select the "GPS IW, and press the IENlj key.
PORT MONITOR menu screen changes to the data display screen.
I"OKI MUNI IOK
1. PORT MONITOR:
2. PORT LOG
[Notes
1
(DXI
[Cj:;c;."WI~I
El(!lll
4.2s1:E.oo.o: 158. :o2o9o3.oo. :w.o*2
D
$GPGLL,3541.273,N, 13934.251,E,0126
01.0
$GPGGA,012602.00,3541.273,N, 13934.
251.E.2.08,01.0,+0050,M,+039,M.05,
. 0686*5C
$PRMC,012601.00,A,3541.273,N, 1393
4.251,E,OO.O, 158.,020903,00. ,W,D*2
D
$GPGLL,3541.273,N, 13934.251,E,0126
01.0
$GPGGA,012602.00,3541.273,N, 13934.
251.E.2.08,01.0,+0050,M.+039,M.05,
. 0686*5C
El'
-When neither the GPS receiver nor MPD is connected to the port
of
•GPS IN" and •oiSP IN", nothing is
displayed on the data display screen.
I
b. Store the displaying data temporarily
Procudure
1) Press the
8
key. The sub screen appears.
2) Select the "[START]", and press the IENlj key. Storing of
the displaying data is started.
During storing, the following is displayed on the screen
title.
"
NOW LOGGING ...
II
-When the IMENUI. IDISPI or IUSERI key is pressed,
storing of the displaying data is stopped.
-Data is recordable to two screens.
-Data is stored until the power is turned off.
3) For canceling, select the "[STOP]" and press the IENlj key.
The sub screen is closed, and storing of the displaying data is stopped.
6-60