JRC NCR-333 Instruction Manual page 87

I
b. The diagnosis of LCD panel (LCD DIAGNOSIS)
Procudure
1) Select 2.LCD DIAGNOSIS
, and press the lEN] key. Cursor moves to the right side of
R:".
2) Press the
~ ~
key and select the following items;
START: Diagnosis is started.
CANCEL: Diagnosis is canceled, and cursor returns to .LCD DIAGNOSIS
3) Select the "START•, and press the IENlj key.
This diagnosis blinks the viewing area every 2 seconds. (White-> Black-> White-> ... )
I
c. Self diagnosis log (SELF DIAGNOSIS LOG)
Procudure
1) Select , and press the IENll key. SELF DIAGNOSIS LOG screen appears.
3.SELF DIAGNOSIS LOG
The newest result is displayed on this screen.
2) To display the next old result, press
the~
key. (Up to last 10 results)
The diagnosed time is displayed when external GPS receiver is connected.
"--/-/----:--"is displayed when time is not able to be acquired. (External GPS receiver is not connected.)
CDXI
• RESULT 29/06/05 12:34
ROM[l] [2] NG
RAM GOOD
SI0[1] [2] [3] NG
PS GOOD
ANTENNA CHECK GOOD
518KHZ OVER ALL TEST GOOD
490KHZ OVER ALL TEST GOOD
4209.5KHZ OVER ALL TEST GOOD
To print a result to the external printer, press the
8
key
in order to display the sub screen.
Select the •[PRINT OUT]", and press the IENll key.
Printing is started.
To stop printing, press the ~ key while printing.
To return to the SELF DIAGNOSIS screen, select the
·[CANCELr and press the IENll key.
6-53