JRC NCR-333 Instruction Manual page 46

I
f. Output the message from an external port
The data of currently opened message text can be
output to the connected the external equipment (ECDIS,
etc).
Procedures
1) Press the
8
key. The sub screen appears.
2) Select the ·[DATAOUTr, and press the lEN] key.
3) Select the port which outputs message data.
- SEL-DATA OUT: The message data is outputted
from a "DATA OUr port.
- SEL- DISP OUT: The message data is outputted
from a "DISP" port.
4) •ARE YOU
SURE?~
is displayed. Select the "[OK]",
and press the IEN1j key. ("NOW OUTPUTTING ... ~ is
displayed on the sub screen.)
To return to the sub screen (SET UP), select
•[CANCEL]" and press the IEN1j key.
5) After
mera~e
outputtin,9.._.!!,as been completed,
press the EN key or the
19:B1
key.
-To stop outputting, press the ICLRj key while outputting.
6-12
JULY 2006
[SEL -ECD IS OUT]
[SEL -D I SP OUT]
[CANCEL]
DATA OUT*
ARE YOU SURE?
[CANCEL]
DATA OUT OK
[CANCEL]