JRC NCR-333 Instruction Manual page 89

a. ALERT HISTORY
This screen displays a history of alarms which occur while the power is on. It displays the alarm history from
the most recent one maximum 20 lines.
To return to the BAM ALERT screen, press
the~
key or
~
key.
General fai ure
4.18/12/31 23 59 3079,2,C,B,N
General fai ure
5.19/01/05 06 15 3079, 1,C,B,V
Bui It in se f test failure
6.19/01/05 06 15 3079,2,C,B,V
General fai ure
7.19/01/05 06 15 3079,3,C.B.V
Antenna inoperative
8.19/01/05 06:15 3079, 1,C,B,V
Bui It in self test failure
9.19/01/05 06:15 3079,2,C,B,V
Genera I fa i I ure
10.19/01/05 06:15 3079, 1,C,B,V
Antenna inoperative
Fig.6-16 ALERT HISTORY screen
Proceudure
1) To display the next old result, press
the~
key.
- "T"
mark is displayed on the bottom line when the alert history screen is able to be scrolled downward.
".A"
mark is
d~layed
on the top line when the alert history screen is able to be scrolled upward.
- Press the
~ ~
key and scroll the viewing area.
The time of an alarm occurred and is restored is displayed when external GPS receiver is connected.
"--1-1--
--:--"is displayed when time is not able to be acquired. (External GPS receiver is not connected.)
The display of the alert is described.
Alert message: 3079.2,
~. ~.
Y...
General failure
1 2 3 4 5
1: The alert ID (refer to the following table)
2: The priority (defined by the BAM)
3: The category (defined by the BAM)
4: The alert condition-> "V": Alarm is occurring ,•N": Healthy status
5:
Alert's description text (refer to the following table)
The list of BAM alert
Alert ID
Alert's description text Priority
Cateaorv
The contents of unusual detection
3079,1
Built in self test failure
c
B
Self diagnosis failure
3079,2
General failure
c
B
Unusual detection at the power supply part
3079,3
Antenna inoperative
c
B
Unusual detection of antenna power supply
3079,4
Flash memory error
c
B
The data in a memory is broken.
3079,5
Rx unit modem error
c
B
Unusual detection at the modem part
3079,6
Printer error
c
B
External printer has malfunction
3116,1
Receiver1 (518kHz) malfunction
c
B
Unusual detection at the RX1 (518kHz)
3116,2
Receiver2(490kHz) malfunction
c
B
Unusual detection at the RX2(490kHz)
3116,3
Receiver3(4.2MHz) malfunction
c
B
Unusual detection at the RX3(4.2MHz)
2) To print the BAM ALERT
to
the external printer, press the
8
key in order to display the sub screen.
Select the "[PRINT OUT]", and press theiENlj key. Printing is started.
[PRINT OUT]: Printing is started.
[CANCEL]: Diagnosis is canceled, and the sub screen is closed.
6-55