JRC NCR-333 Instruction Manual page 64

I
b. Cancel settings
When the~ IMENUV ~ IUSERI key is pressed while setting up ·a. Select receiving stations·, the
information screen (the sub screen) as shown in the following figure is displayed.
Select "OK" or "CANCEL".
OK: Canceling the receiving station settings, and the screen changes according to the pressed
key.
CANCEL: The information screen is closed. Continue the receiving station settings.
rmxr
G
EXIT WITHOUT AI
SAVING.
N
EUinil
I
c.
Set up the next channel (or NAVAREA)
After a setup of a channel (or NAVAREA) finishes, the next channel (or NAVAREA) can be set up
continuously.
Procedures
1) Press the
~ ~ ~ ~
key for selecting
Cursor moves to the right side of R:"
FREQUENC (or
1MA'4i;~#+~).
and press the IEN1j key.
2) Press the
~ ~
key and select the number of NAVAREA.
And then, press the IEN1j key.
3) Select a receiving station in the same procedures as •a. Select receiving stations•.
6-30