Maintenance Menu (Maintenance) - JRC NCR-333 Instruction Manual

I
6.3.5 MAINTENANCE menu (MAINTENANCE)
5.MAINTENANCE To display MAINTENANCE menu screen, select from MAIN MENU (6.3).
Users can check current status of the system by the menu.
IMAN I NTFN.II.Nr.F
(DXI MANINI (DX!
1.SELF DIAGNOSIS
2.BAM ALERT
3.STATUS
4. PORT MONITOR
5.SOFTWARE VERSION
l.SELF DIAGNOSIS
2.NAVTEX ALARM
3.STATUS
4. PORT MONITOR
5.SOFTWARE VERSION
- PROGRAM
04.00
-PROGRAM: 04.00
- LANGUAGE: 01.00
-LANGUAGE: 01.00
- OPTION
- OPTION :
Elfm
(When connected to the BAM) (When not connected to the BAM)
Fig.6-13 MAINTENANCE menu screen
Procedures
1. Press te
~~key
to select the menu item.
2. When EN key or ~ key is pressed, the menu screen of selected item is displayed.
- When cursor is on the item 1-4, cursor moves to the right side of
":ft
- When cursor is on the item 5, the menu screen of item 5 appears.
-To return to the MAIN MENU screen, press the~ key or ~ key.
- If the when cursor is on the right side of":", cursor returns on the item .
2. CER DISP.SETIING
.
....
)
-When you do not connect to the BAM, the notation of "2.BAM ALERT" is "2.NAVTEX ALARM".
The outlines of menus are as follows;
1. SELF DIAGNOSIS: Perform self diagnosis test.
2. BAM ALERT: Display alarm logs for disorders.
(NAVTEX ALARM)
3. STATUS: Display current status of NAVTEX setting.
4. PORT MONITOR: Display serial data of each port.
5. SOFTWARE VERSION:Display versions of software installed in NCR-333.
6-50
(See 6.3.4.1)
(See 6.3.4.2)
(See 6.3.4.3)
(See 6.3.4.4)
(See 6.3.4.5)