JRC NCR-333 Instruction Manual page 81

I
6.3.4.6 External equipment message output settings (INS MSG OUTPUT SETTING)
INS port (DATA OUT) message output conditions can be set up when connecting external equipment.
.. vm
STATION SELECT ALL
518k:
~B-DEFGHIJKLMNOPQRSTUVWXYZ
490k: A-CDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: -BCDEFGHIJKLMNOPQRSTUVWXYZ
MSG TYPE SELECT ALL
518k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
490k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: ABCDEFGHIJKLMNOPQRSTUVWXYZ
The items of the station and message type selection screen are followings;
-Station A to Z and message type A to Z of outputted messages via INS port.
"SELECT ALL" : Select all the station or msg type from A to Z.
"N to "Z~ display : Messages are outputted via INS port .
.. _.display :Messages are not outputted via INS port.
[Notes]~----------------------------------------------------------~
Navigational warning [A], Meteorological warning [8], Search and rescue information/piracy and armed
robbery [D], Navigational warning [L] are obliged to receive a message. These message types setting
cannot be changed.
I
a. Select stations and message type
Press
the~~~ ~key
to select station and messge type for setting.
-Pressing the ENT key switches alternately
b~tween
"(A-Z) "and·-".
- Select the "SELECT
ALL~
and press the EN key, settings changes to all.
I
b. Cancel settings
When the~ IMENUV ~ IUSERI key is pressed while setting up ·a. Select receiving stations and
message type", the information screen (the sub screen) as shown in the following figure is displayed.
Select
"0~
or"CANCEL".
OK: Canceling the receiving station settings, and the screen changes according to the pressed
key.
CANCEL: The information screen is closed. Continue the station and message type settings.
>~<INS
MSG SET*
EX IT WITHOUT
SAVING.
ARE YOU SURE?
(SAVE:PRESS '*'KEY)
00JM
[CANCEL]
6-47