JRC NCR-333 Instruction Manual page 75

I
6.3.3.5 Assigning to the ijsEij key (USER KEY SETTING)
key can be assigned to the often used function (screen).
, and press
the~
key. USER KEY SETTING screen appears.
D:POSITION/TIME
E:RX STATION SETTING MENU
F:AUTO MODE SETTING
G:MANUAL MODE SETTING
H:MESSAGE TYPE SETTING MENU
(:DISPLAY SETTING MENU
J:USER KEY SETTING
K:NAVTEX SETTING MENU
L:MAINTENANCE MENU
M:SELF DIAGNOSIS
N:BAM ALERT
[•.1tJll@
Fig.S-11 USER KEY SETTING screen
SXI
Press
the~~
key and select from "A" to "Z", and then press the IENlj key. "USER KEY" setting is saved.
"T"
mark is displayed on the bottom line when the USER KEY SETTING screen is able to scroll downward .
• _. .. mark is displayed on the top line when the USER KEY SETTING screen is able to scroll upward.
To display DISPLAY menu screen, press the
g]l.
Refet th
~II
r a e a owmg e a au see e1ems; tabl b t I ctabl
"t
Title
Explanation
A MESSAGE LIST1
MESSAGE LIST 1 screen is displayed.
B MESSAGE LIST2
MESSAGE LIST 2 screen is displayed.
c
SELECT MESSAGE LIST
SELECT MESSAGE LIST screen is displayed.
D POSITION/ITME POSITION/TIME screen is displayed.
E RX STATION SETTING MENU RX STATION menu screen is displayed.
F AUTO MODE SETTING
AUTO MODE SETTING screen (RX STATION menu) is
displayed.
G MANUAL MODE SETTING
MAMUAL MODE SETTING screen (RX STATION menu) is
displayed.
H MESSAGE TYPE SETTING MENU MESSAGE TYPE SETTING screen is displayed.
I DISPLAY SETTING MENU DISPLAY menu screen is displayed.
J USER KEY SETTING This screen (SER KEY SETTING) is displayed.
K NAVTEX SETTING MENU NAVTEX menu screen is displayed.
L MAINTENANCE MENU MAINTENANCE menu screen is displayed.
M SELF DIAGNOSIS SELF DIAGNOSIS screen (MAINTENANCE menu) is displayed.
N BAM ALERT(NAVTEX ALARM) BAM ALERT screen (MAINTENANCE menu) is displayed.
0
STATUS
STATUS screen (MAINTENANCE menu) is displayed.
p
PORT MONITOR
PORT MONITOR screen (MAINTENANCE menu) is displayed.
Q
STATION NAME EDIT STATION NAME menu screen is displayed.
y
PRINT
Printing is started if the
~
key is pressed on the screen
which can print the external printer. Printing is stopped if the
19]1
key is pressed during printing.
z
NON USE The IUSERI key cannot be used.
[Notes
l
When you do not connect to the BAM, the notation of"BAM ALERr is
"NAVTEXALARM~.
6-41