JRC NCR-333 Instruction Manual page 58

I
a.
Select the displayed message
The displayed message can be selected.
Procedures
1) Press the
8
key. The sub screen appears.
2) Select the ·FILTER", and press the IENlj key.
The items of "FILTER SEr appear.
3) The messages displayed on the select four items.
(Items: channel, navarea, message, and msg id.)
Press the
[!]
~
key to select, and press the IENlj key.
-CHANNEL
-NAVAREA
-MESSAGE
-MSG ID
:The display channel is selected from '518kHz', '490kHz', '4209.5kHz' or 'ALL'.
:The display NAVAREA is selected from 'I' to 'XVI' or 'ALL'.
:The display message is selected from 'SAVED', 'UNSAVED' or 'ALL'.
:The display msg ID is selected from
'P\
to
'Z',
'0' to '9' or '?'(ALL).
? ? ? ?
-=-l-=-l
[T~e
display message type is selected from '0' to '9', or '?'(ALL).
The display message type is selected from 'P\ to
'Z',
or '?'(ALL).
The display coast station is selected from
'P\
to
'Z',
or '?'(ALL).
MSGID
4) Select the [OK], and press the IENlj key. Selecting message starts.
6-24