JRC NCR-333 Instruction Manual page 47

I
6.2. 7.2 Message list 1
Press the IDISPI key several times. The list of the currently stored messages appears.
This list shows a receiving station and a message type for each message.
(Character size: MEDIUM)
(Notes
I
The number on the left side of DATA shows the
message number of the present cursor position. The
right side number shows the total number of messages.
(Character size: NORMAL)
(Character size: LARGE)
Fig.6-2 Message list 1
-"LINES" and RTIME" are not displayed when character size has been selected "LARGE".
(Same applies to the message list 2 and a select message list)
6-13