Receiving Message Type Settings (Message Type Setting) - JRC NCR-333 Instruction Manual

I
6.3.2 Receiving message
type
settings (MESSAGE TYPE SETTING)
To display MESSAGE TYPE SETTING menu screen, select . MESSAGE TYPE SETTING
· , X I
.N: [SPARE]
.0: [SPARE]
DP: [SPARE]
.Q: [SPARE]
.R: [SPARE]
.s:
[SPARE]
DT: [SPARE]
DU: [SPARE]
.V:SPECIAL
[JN:SPECIAL
oX:SPECIAL
OY:SPECIAL
OZ:QRU(NO MSG)
Fig.6-9 MESSAGE TYPE menu screen
The items of the receiving message type selection screen are as follows;
-FREQUENCY: Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)).
- D
SELECT ALL: Select all the messages from A to Z.
I:
A message is received.
O:
A message is not received.
- Receiving message A- Z : Select receiving message from A to Z
[Notes
l t - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ,
Navigational warning [A], Meteorological warning [8], Search and rescue information/piracy and armed
robbery [D], Navigational warning (additional) [L] are obliged to receive a message. These message types
setting cannot be changed.
I
a. Select receiving message types
Start with selection of "FREQUENCY".
Carry out the procedure from section 3) to 5) of p.6-29 "a. Select receiving stations".
I
b. Cancel settings
Carry out "b. Cancel settingsn of p.6-30.
I
c. Save (or Clear) settings
Carry out the procedure from section 1) to 4) of p.6-31 "d. Save (or Clear) settings".
6-37