JRC NCR-333 Instruction Manual page 83

I
6.3.4. 7 External printer message output settings (PRINTER MSG OUTPUT SETTING)
Serial port (RS-232C: MAINTENANCE/PRINTER) message output conditions can be set up when connecting
external printer.
The external printer message output settings can be operated when the DATA OUT of 5.PRINTER
PROPERTY is MAUTO" setting.
STATION SELECT ALL
518k:
~B-DEFGHIJKLMNOPQRSTUVWXYZ
490k: A-CDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: -BCDEFGHIJKLMNOPQRSTUVWXYZ
MSG TYPE SELECT ALL
518k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
490k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: ABCDEFGHIJKLMNOPQRSTUVWXYZ
EIU
The items of the receiving station and message type selection screen are followings;
- Station A to Z and message type A to Z of outputted messages via printer port.
"SELECT ALL"
: Select all the station or msg type from A to Z.
"N
to
·z·
display : Messages are outputted via printer port.
"-M display :Messages are not outputted via printer port.
[Notes]~----------------------------------------------------------~
Navigational warning [A], Meteorological warning
[B],
Search and rescue information/piracy and armed
robbery
[D],
Navigational warning [L] are obliged to receive a message. These message types setting
cannot be changed.
I
a. Select stations and message type
Carry out "a. Select stations and message type • of p.S-43.
I
b. Cancel settings
Carry out "b. Cancel settings• of p.S-43.
I
c. Save (or Clear) settings
Carry out the procedure from section 1) to 4) of p.S-44 "c. Save (or Clear) settings".
6-49