JRC NCR-333 Instruction Manual page 76

I
6.3.3.6 POSITION/TIME
screen settings
(POS/TIME DISP .SED
"POSfTIME DISP.SET" can set up the item displayed on the POSITIONfTIME screen.
POSITIONfTIME screen can be displayed selecting items of "position (POSt. "time (TIME)", and
•navigational information (NAV)".
[
' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' !
6.POS/TIME DISP.SET(l) :POS
(2) : TIME/NAV
' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' '
lilillllillllii...,.......,iilliill...,....,il&w.rJ•
and press the lEN] key. Cursor moves to the right side of":".
2. Press
the~~
key and select the "POS", "TIME• or "OFF", and then press the lEN] key.
This item is displayed on the upside of the POSITIONfTIME screen.
[Notes
l
The setup time difference is displayed on the POSITIONfTIME screen.
When you have selected "OFF•, cursor ends the setup of this item, without moving to the lower line "(2)"
and pressing the IDISPI key does not display the POSITIONfTIME screen.
3. The cursor moves to the lower line "(2)". Press
the~~
key, and then press the IENlj key.
This item is displayed on the downside of the POSITIONfTIME screen.
(1 ): POS, The selectable items of
"(2r
are as follows.
OFF, TIME, TIME/NAV
(1 ): TIME, The selectable items of
"(2r
are as follows.
OFF, POS, POSfTIME
-When "OFF" is selected, only the item of (1) is displayed on POSITION/TIME screen.
-When •riME" (or "POS") is selected, this item is displayed on the downside
of
the POSITIONfTIME
screen.
- When "TIME/NAV" (or
"POS/NA~)
is selected, time is displayed on the left side, and navigational
information is displayed on the right side of the POSITIONfTIME screen.
Ex) The following figure is an example when selecting
•pos·
and "TIME/NAV".
(1): POS
(2): TIMEINAV
I
The item of ( 1 )
I
I
The item of (2)
I
6-42