Reverse opening procedure to close hood and side panels. Properly
hook up latches.
33) Fuses
To remove fuse from holder, pull fuse out. Check if filament is melted.
A15E0KA
1. Fuse
2. Check if melted
CAUTION: Do not use a higher rated fuse as this can cause se-
vere damage to electric components and/or fire.
If fuse has burnt out, source of malfunction should be determined
and corrected before restarting. See an authorized SKI-DOO deal-
er for servicing.
Charging System Fuse
Charging system is protected with 30 ampere rated fuse. See follow-
ing illustration for fuse holder location. If charging system does not
operate, check fuse condition and replace it if necessary.
WARNING
1
2
69