Table of Contents
Advertisement
1. Rear Springs — Comfort
IMPORTANT: Make sure that all objects to be transported are in
place in storage compartment and rear rack.
Grab rear bumper and lift until suspension is fully extended. From this
point, rear of snowmobile should collapse by 50 to 75 mm (2 to 3 in)
when driver and passenger (if so applicable) take place. Measure at
rear bumper as shown in next photo.
Do not attempt to lift the vehicle by hand alone. Use appropri-
ate lifting device or have assistance to share lifting stress in
order to avoid risk of strain injuries.
A
A32F0BA
TYPICAL — PROPER ADJUSTMENT
A. From fully extended, rear of suspension has collapsed by 50 to 75 mm (2 to 3 in)
78
WARNING
Advertisement
Table of Contents
