Radiator Cap; Fuses; Tool Kit; Rewind Starter Handle - BOMBARDIER Outlander 400 Operator's Manual

WARNING
Ensure to install the proper ball
size that matches the equipment
you will tow.
NOTE: Follow manufacturer's instruc-
tions for proper attachment.

20) Radiator Cap

Located in service compartment, un-
der access panel.
WARNING
In order to avoid getting burned,
do not remove the radiator cap
when the engine is hot.
To remove the radiator cap, press and
turn it counterclockwise. Reverse the
removal procedure to install.
1
V07A0AZ
TYPICAL
1. Radiator cap

21) Fuses

The electrical system is protected with
fuses. Refer to MAINTENANCE for
details.
The fuse holders are located in the ser-
vice compartment.
vmo2006-005-029_a
FUSES LOCATION
1. Accessories (15 A)
2. Fan (20 A)
3. Main (30 A)
4. Charging system (20 A)

22) Tool Kit

The tool kit is located in the rear stor-
age compartment. It contains tools
for basic maintenance, this OPERA-
TOR'S GUIDE and the ATV WINCH
OPERATOR'S MANUAL with the XT
models .
The tools included in the tool kit are:
– pliers (1)
– screwdriver (1)
– open wrench 10/13 mm (1)
– open wrench 15/17 mm (1)
– socket wrench 10/13 mm (1)
– socket wrench 16/18 mm (1)
– tire pressure gauge (1)
– shock absorber key (1)
– fuse 30 A (1)
– fuse 20 A (1)
– fuse 15 A (1).

23) Rewind Starter Handle

The rewind starter handle is provided
as an emergency starting device.
Follow the usual starting procedure;
but use the rewind starter instead of
the electric starter.
_____________________
77