Table of Contents
Advertisement
6. Rear Shock Motion Ratio — Damping Strength
Rear shock motion ratio can be adjusted according to driver and pas-
senger weight and/or trail condition.
There are two adjustment positions.
2
A32F30A
1. Soft position
2. Firm position
Remove tether cord cap before performing any maintenance
or adjustment, unless otherwise specified. Vehicle must be
parked in a safe place, away from the trail.
To adjust, remove nut, move bolt to desired position. Install a new
nut and torque it to 24 N• m (18 lbf• ft).
Never reuse elastic stop nut. Always install a new one.
94
WARNING
WARNING
1
Advertisement
Table of Contents
